Aluminum honeycomb panels are suitable for industrial buildings, vehicle and ship decoration design, etc. It is the raw materials for airlines and aerospace applications in industrial construction. The entire production process is carried out in an intelligent processing factory. The technology of compression molding is selected. Due to the high thermal conductivity between the aluminum skin and the honeycomb shape, the thermal expansion and contraction of the inner and outer aluminum skin are at the same time; the honeycomb aluminum skin has small round holes, so The vapor in the plate can flow at will; the dragging installation button system software is not easy to cause structural deformation during thermal expansion and contraction. The key to the control panel is a high-quality 3003H24 aluminum alloy aluminum plate or 5052AH14 high manganese aluminum alloy aluminum plate. The thickness of the control panel is 0.8~1.5mm. The thickness of the control panel is 0.8~1.5mm. , Acid rain erosion resistance, self-washing performance is stronger than PVDF, the thickness of the base plate is 0.6~1.0mm, and the total thickness is 25mm.
The core plate is made of hexagonal 3003 aluminum honeycomb core, the aluminum platinum thickness is 0.04~0.06mm, and the Ling length is 5~6mm. The roll forming technology is used to form the front and back skins. The automatic mechanical equipment presses the edges. The front and back skins are in The mounting edge firmly occludes the teeth. The entire production process is carried out in an intelligent processing factory. The technology of compression molding is selected. Due to the high thermal conductivity between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skins are at the same time; the honeycomb aluminum skin has small round holes, so The vapor in the board can be freely fluid; the draggable installation buckle system software is not easy to cause structural deformation during thermal expansion and contraction, so it can ensure a very high flatness. Adhesive: two-component polyurethane high-temperature dry-curing adhesive, The automatic honeycomb panel composite production line equipment is made according to the pressure and high-temperature composite model, which can get rid of the ductility problem of the honeycomb panel adhesive layer in the past. The inner layer is a specially made hexagonal honeycomb aluminum, which is composed of aluminum alloy profiles with a strength exceeding H19. As a blockboard adhered to the barrier structure, it can withstand the upward force in the cut. This mutually constrained gathering honeycomb is like many j-beams, which can decentralize the work pressure from the direction of the control panel, make the board support evenly, and ensure that the control panel can maintain a high flatness even in a large total area. .