Points To Note When Using Honeycomb Panels

Honeycomb panels have been widely used with many advantages such as green, environmental protection, energy-saving, lightweight, high strength, and high rigidity. However, honeycomb panels have some problems that need to be paid attention to. Let's introduce them in detail below:

1. Each part of the honeycomb panel needs to be subjected to scientific mechanical calculations. It is necessary to examine the effects of temperature, earthquake, and wind pressure on the honeycomb panel from many aspects. The embedded parts, connection systems, keel systems, panels and fasteners need to be checked. Check carefully to ensure safety.

2. The floating connection can ensure the integral recovery ability of the honeycomb panel, will not cause deformation of the honeycomb panel, and avoid the occurrence of bulging or recessed surfaces of the honeycomb panel.

3. The fixed plate method has a smooth effect on the installation of the plate. The inconsistent force on the fixed point of each plate will cause the deformation of the surface material and affect the exterior effect. Therefore, the fixed plate method must be fixed at a fixed distance to ensure the surface of the honeycomb plate is stable. .

4. Whether there are reinforcement measures at the edge removal of the composite surface material. Because the folded edge of the composite panel material only retains the thickness of the front plate, the thickness becomes thinner and the strength is reduced, so reliable reinforcement measures must be taken for the edge removal.

5. Whether stiffeners are reasonably arranged on the back of the board to increase the strength and rigidity of the board surface, the arrangement distance of the stiffeners and the strength and rigidity of the stiffeners must all meet the requirements to ensure the function and safety of the honeycomb panel.

6. Is the waterproof sealing method reasonable? There are many waterproof sealing methods, such as structural waterproof, internal waterproof, glue sealing, and different sealing methods at different prices. Choose a suitable sealing method to use in the project to ensure the function and exterior of the honeycomb panel. Decoration effect.

7. Whether the selected materials meet the specifications, standards and design requirements.

8. Nowadays, various building materials are flooding the building market, and the quality of the materials is not the same. Choosing qualified materials is the foundation of ensuring the quality of honeycomb panels. Strict inspection methods and methods must be adopted to ensure the quality of materials.

The above are the issues that the honeycomb panel should pay attention to. Only by doing these points will it not affect the normal use of the honeycomb panel, and it will function to ensure safety.